Epoxy flooring is a rather modern type of finishing, having been born around the 1950s, and in recent years it is experiencing a rapid spread, thanks to the low costs, the particular modern look, and the interesting features. All this makes the epoxy flooring a type of finishing very suitable to be combined with the lacquered walls of the most modern environments.
The average cost of laying a resin flooring depends on various factors, including:
The table below shows the average prices for laying epoxy floors per 100 square feet.
| Prices per 100 linear foot | prices from to |
|---|---|
| Epoxy floor with trowel | 65 - 120 |
| Self-leveling epoxy floor | 85 - 150 |
| Drawings and / or decorations | 45 - 95 |
| Basement reconstruction | 40 - 120 |
The creation of particular chromatic effects, in the laying of epoxy flooring, and above all the addition of elaborate artistic decorations, can significantly increase the costs of resin floors. In total, this can be an increase in the order of 50%.
To fully understand the cost of epoxy floors, it is necessary to list the characteristics. The strengths of this floor are so many:
In reality, it would be more correct to speak of water repellency but also the concept of waterproofing can be suitable for some types of epoxies (they change characteristics depending on the mix with which they were made). The first advantage is that epoxy floors (costs visible above) do not suffer from humidity and water. That's why they are chosen by more and more people for a modern bathroom or a different kitchen.
The situation can change in the case of rising dampness in the floor on which you decide to lay the epoxy floors. Costs may vary due to the need to lay a layer of waterproof material on the screed before actually starting (the thickness increases).
The thickness of the epoxy floors has interesting costs also due to the low quantity of material that must be used. In fact, in most cases, 0.375 inches of thickness is sufficient to obtain a beautiful, sturdy floor with all the typical characteristics of the resin.
This aspect makes the drafting work very quick and reduces costs and construction site inconveniences. It is also an excellent solution to cover an existing floor without demolition or whenever there is not a lot of thickness available in height (under penalty of not respecting the minimum height for habitability).
Epoxy floors (costs vary and can be consulted above) are also excellent for allergy sufferers or for flooring in high-traffic areas such as hospitals, schools, etc. In the following paragraphs, we will also see how an epoxy floor should be cleaned and what advantages it entails.
Why should we be interested in the thermal conductivity of epoxy floors? Costs are always the aspect that most interests our users, but the low conductivity makes this material excellent in case you want to have an underfloor heating system installed. Thus, with very little thickness, you can have a sturdy and easy to clean floor, with a pleasant warmth that will envelop your feet.
Aesthetic variability is really one of the hallmarks of the resin. This means that when the material is laid out on the floor it will never create a pattern that is the same as one made previously. By choosing epoxy resin floors at competitive costs, you will be assured of a truly unique floor, capable of furnishing your home and representing your personality.
Due to its waterproof characteristics, the epoxy flooring is very easy to clean, and you can use a common rag soaked in water. The only noteworthy problem of the epoxy flooring could be that of the yellowing of the surface exposed to ultraviolet rays, so it would be better to lay the resin flooring only in areas with little exposure to direct sunlight.
For the same reason, it is advisable to evaluate in advance the exposure of the environments on which to lay the resin flooring, in order to choose the most suitable resins for the purpose, which contain special additives capable of counteracting the effect of UV rays. In the case of evident yellowing effects, which should occur after years, it can still be avoided by laying a new layer of epoxy flooring.
In addition to the fairly low cost, the epoxy flooring has several advantages over the classic ceramic flooring and parquet. First of all, it is made in a single block, without the characteristic joints of floors made with slabs or tiles, and without the typical interstices of parquet coverings.
This particularity has the advantage of making the epoxy flooring water-repellent, avoiding the well-known problems of parquet or terracotta floors, which are much more exposed to the infiltration of water or liquids of any kind. The chemical composition of the materials used in the epoxy flooring prevents the formation of mold or contamination by chemical agents, with obvious advantages for home hygiene. Finally, the epoxy flooring has a limited thickness, between 1.5 mm and 3 mm, and this allows it to be the ideal coating for radiant heating floors.
Epoxy flooring is made up of polymer materials and synthetic resins, which can be mixed with specific dyes, for the creation of floors in the most varied colors. The finish of the epoxy flooring can be both glossy and opaque: for this reason, the most diverse chromatic effects can be achieved with the epoxy flooring, from shades to the most elaborate artistic decorations.
The laying of the epoxy flooring takes place after adequate preparation of the substrate, which is grouted and smoothed before depositing an even layer over the entire surface of the floor. The resins used in the flooring are self-leveling, that is, they are arranged on the surface in order to create a level flooring. The finish can be of the spatula type, and therefore the resins must be treated and sanded to obtain the same effect.
The installation of the self-leveling epoxy flooring requires the application of several layers, and it can also be applied on pre-existingfloors, without having to remove them: this represents another advantage of the epoxy flooring, and that is the saving not only economic but also time. At the end of the laying of the epoxy flooring, it is necessary to wait a few days to allow the various layers of resin to dry.
Now you should know a lot more about epoxy resin floors: costs, types, and advantages. You just have to take action by immediately sending your application form to us at LocalProBook free of charge and without obligation. We will carefully evaluate your needs to quickly get you in touch with the best installers in your area. You will also be able to evaluate their profiles based on the reviews left to them by LocalProBook customers and on photos of completed jobs.
Usually, 24 hours from your request are enough to get the first feedback from serious, honest, and specialized local pros. You will be able to freely evaluate their profiles as mentioned above and decide for yourself who to contact for an inspection and detailed and easy to compare estimates. So you will have all the info to understand the costs of resin floors and you can make the right decision in total serenity.